ATEX Certification for EU

DCS is highly skilled technical staff will provide you with expert testing & certification services for your equipment used in hazardous locations in Europe as required by the ATEX directive. We can test & certify your equipment for hazardous locations to European standards as a Notified Body under the ATEX directive.

The ATEX requirements
The ATEX directive requires the following major elements to be met in order to apply the ATEX marking:

The CE mark – The CE mark is a self-declaration marking indicating that your equipment conforms to applicable technical provisions and ATEX requirements and other directives.
Essential health and safety requirements – Annex II of the ATEX directive, requires that you establish principles of integrated explosion safety from all electrical and non-electrical ignition sources. You can demonstrate compliance to these requirements by following the harmonized European standard series EN 60079.
EC Type Examination Certificate – For Category 1 (electrical and mechanical) and Category 2 (electrical) equipment, a Notified Body will need to verify that your equipment has met the relevant applicable provisions of the ATEX directive in order to receive an EC Type Examination Certificate. For Category 3 equipment, an EC Type Examination Certificate is not required, however, manufacturers must ensure that your products comply with ATEX by following the appropriate conformity route.
Quality Assessment – The facility(s) producing your equipment must undergo a Quality Assessment of EN13980 which will result in a Notified Body issuing you a Quality Assurance Notification (QAN).