ISO 16087: 2013 Implants for surgery, Uncategorized

ISO 16087: 2013 Implants for surgery 3

Posted on by owner

Courtesy: ISO 16087: 2013 Implants for surgery

  • ISO/TS 16407 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1
    • ISO/TS 16407-1:2011 Part 1: Test suite structure and test purposes
    • ISO/TS 16407-2:2012 Part 2: Abstract test suite
  • ISO/TS 16410 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3
    • ISO/TS 16410-1:2011 Part 1: Test suite structure and test purposes
    • ISO/TS 16410-2:2012 Part 2: Abstract test suite
  • ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry – Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
  • ISO 16428:2005 Implants for surgery – Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
  • ISO 16429:2004 Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
  • ISO 16437:2012 Ships and marine technology – Lifesaving and fire protection – Atmospheric oil mist detectors for ships
  • ISO 16439:2014 Information and documentation – Methods and procedures for assessing the impact of libraries
  • ISO 16443:2014 Dentistry – Vocabulary for dental implants systems and related procedure
  • ISO/IEC 16448:2002 Information technology – 120 mm DVD – Read-only disk
  • ISO/IEC 16449:2002 Information technology – 80 mm DVD – Read-only disk
  • ISO 16457:2014 Space systems – Space environment (natural and artificial) – The Earth’s ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
  • ISO/TS 16460:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – Communication protocol messages for global usage
  • ISO/IEC 16480:2015 Information technology – Automatic identification and data capture techniques – Reading and display of ORM by mobile devices
  • ISO 16484 Building automation and control systems (BACS)
    • ISO 16484-1:2010 Part 1: Project specification and implementation
    • ISO 16484-2:2004 Part 2: Hardware
    • ISO 16484-3:2005 Part 3: Functions
    • ISO 16484-5:2017 Part 5: Data communication protocol
    • ISO 16484-6:2014 Part 6: Data communication conformance testing
  • ISO/IEC 16485:2000 Information technology – Mixed Raster Content (MRC)
  • ISO 16495:2013 Packaging – Transport packaging for dangerous goods – Test methods
  • ISO/IEC 16500 Information technology – Generic digital audio-visual systems
    • ISO/IEC 16500-1:1999 Part 1: System reference models and scenarios
    • ISO/IEC 16500-2:1999 Part 2: System dynamics, scenarios and protocol requirements
    • ISO/IEC 16500-3:1999 Part 3: Contours: Technology domain
    • ISO/IEC 16500-4:1999 Part 4: Lower-layer protocols and physical interfaces
    • ISO/IEC 16500-5:1999 Part 5: High and mid-layer protocols
    • ISO/IEC 16500-6:1999 Part 6: Information representation
    • ISO/IEC 16500-7:1999 Part 7: Basic security tools
    • ISO/IEC 16500-8:1999 Part 8: Management architecture and protocols
    • ISO/IEC 16500-9:1999 Part 9: Usage information protocols
  • ISO/IEC TR 16501:1999 Information technology – Generic digital audio-visual systems – Technical Report on ISO/IEC 16500 – Description of digital audio-visual functionalities
  • ISO/IEC 16504:2011 Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space
  • ISO/IEC 16509:1999 Information technology – Year 2000 terminology
  • ISO/IEC 16512 Information technology – Relayed multicast protocol
    • ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework
    • ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group applications
  • ISO/IEC 16513:2005 Information technology – Group management protocol
  • ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)
  • ISO 16548:2012 Ships and marine technology – Ship design – General guidance on emergency towing procedures
  • ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
  • ISO/TS 16550:2014 Nanotechnologies – Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
  • ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions
  • ISO 16571:2014 Systems for evacuation of plume generated by medical devices
  • ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures
  • ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements
    • ISO 16589-2:2011 Part 2: Vocabulary
  • ISO 16609:2012 Financial services – Requirements for message authentication using symmetric techniques
  • ISO 16610 Geometrical product specifications (GPS) – Filtration
  • ISO 16612 Graphic technology – Variable printing data exchange
    • ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
    • ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
  • ISO 16613 Graphic technology – Variable content replacement
    • ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
  • ISO 16622:2002 Meteorology – Sonic anemometers/thermometers – Acceptance test methods for mean wind measurements
  • ISO 16628:2008 Tracheobronchial tubes – Sizing and marking
  • ISO 16638 Radiological protection – Monitoring and internal dosimetry for specific materials
    • ISO 16638-1:2015 Part 1: Inhalation of uranium compounds
  • ISO 16641:2014 Measurement of radioactivity in the environment – Air – Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
  • ISO 16642:2017 Computer applications in terminology — Terminological markup framework
  • ISO 16649 Microbiology of the food chain – Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli
    • ISO 16649-1:2001 Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
    • ISO 16649-2:2001 Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
    • ISO 16649-3:2015 Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
  • ISO 16654:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli O157
  • ISO 16671:2015 Ophthalmic implants – Irrigating solutions for ophthalmic surgery
  • ISO 16672:2015 Ophthalmic implants – Ocular endotamponades
  • ISO 16682:2015 Aerospace series – Terminology for clamping devices
  • ISO 16684 Graphic technology – Extensible metadata platform (XMP) specification
    • ISO 16684-1:2012 Part 1: Data model, serialization and core properties
    • ISO 16684-2:2014 Part 2: Description of XMP schemas using RELAX NG
  • ISO/TR 16705:2016 Statistical methods for implementation of Six Sigma – Selected illustrations of contingency table analysis
  • ISO 16706:2016 Ships and marine technology – Marine evacuation systems – Load calculations and testing
  • ISO 16707:2016 Ships and marine technology – Marine evacuation systems – Determination of capacity
  • ISO 16744:2003 Dentistry — Base metal materials for fixed dental restorations [Withdrawn: replaced with ISO 22674]
  • ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
  • ISO 16760:2014 Graphic technology – Prepress data exchange – Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows
  • ISO/TR 16764:2003 Lifts, escalators and passenger conveyors – Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
  • ISO/TS 16785:2014 Electronic Fee Collection (EFC) – Interface definition between DSRC-OBE and external in-vehicle devices
  • ISO/TR 16786:2015 Intelligent transport systems – The use of simulation models for evaluation of traffic management systems – Input parameters and reporting template for simulation of traffic signal control systems
  • ISO 16787:2016 Intelligent transport systems – Assisted Parking System (APS) – Performance requirements and test procedures
  • ISO/TS 16791:2014 Health informatics – Requirements for international machine-readable coding of medicinal product package identifiers
  • ISO 16792:2015 Technical product documentation – Digital product definition data practices
  • ISO 16818:2008 Building environment design – Energy efficiency – Terminology
  • ISO/IEC 16824:1999 Information technology – 120 mm DVD rewritable disk (DVD-RAM)
  • ISO/IEC 16825:1999 Information technology – Case for 120 mm DVD-RAM disks
  • ISO 16832:2006 Acoustics – Loudness scaling by means of categories
  • ISO 16840 Wheelchair seating
    • ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
  • ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture
    • ISO/TS 16843-1:2016 Part 1: Acupuncture points
    • ISO/TS 16843-2:2015 Part 2: Needling
  • ISO 16894:2009 Wood-based panels – Oriented strand board (OSB) – Definitions, classification and specifications
  • ISO 16902 Hydraulic fluid power – Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method
    • ISO 16902-1:2003 Part 1: Pumps
  • ISO 16919:2014 Space data and information transfer systems – Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
  • ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Withdrawn: replaced by IATF 16949:2016]
  • ISO/TS 16951:2004 Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers
  • ISO/TS 16955:2016 Prosthetics – Quantification of physical parameters of ankle foot devices and foot units
  • ISO/IEC 16963:2017 Information technology – Digitally recorded media for information interchange and storage – Test method for the estimation of lifetime of optical disks for long-term data storage
  • ISO/IEC 16969:1999 Information technology – Data interchange on 120 mm optical disk cartridges using +RW format – Capacity: 3,0 Gbytes and 6,0 Gbytes
  • ISO 16971:2015 Ophthalmic instruments – Optical coherence tomograph for the posterior segment of the human eye
  • ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design

ISO 17000 – ISO 17999

  • ISO/IEC 17000:2004 Conformity assessment – Vocabulary and general principles
  • ISO/IEC 17007:2009 Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment
  • ISO/IEC 17011:2017 Conformity assessment – Requirements for accreditation bodies accrediting conformity assessment bodies
  • ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
  • ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
    • ISO/IEC 17021-1:2015 Part 1: Requirements
    • ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems
    • ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems
    • ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems
    • ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems
    • ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems
    • ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems
    • ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems
  • ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
  • ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
  • ISO/IEC 17024:2012 Conformity assessment – General requirements for bodies operating certification of persons
  • ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
  • ISO/IEC TR 17026:2015 Conformity assessment – Example of a certification scheme for tangible products
  • ISO/IEC TS 17027:2014 Conformity assessment – Vocabulary related to competence of persons used for certification of persons
  • ISO/IEC TR 17028:2017 Conformity assessment – Guidelines and examples of a certification scheme for services
  • ISO/IEC 17029:2019 Conformity assessment — General principles and requirements for validation and verification bodies
  • ISO/IEC 17030:2003 Conformity assessment – General requirements for third-party marks of conformity
  • ISO/IEC 17033:2019 Ethical claims and supporting information – Principles and requirements
  • ISO 17034:2016 General requirements for the competence of reference material producers
  • ISO/IEC 17040:2005 Conformity assessment – General requirements for peer assessment of conformity assessment bodies and accreditation bodies
  • ISO/IEC 17043:2010 Conformity assessment – General requirements for proficiency testing
  • ISO 17049:2013 Accessible design – Application of braille on signage, equipment and appliances
  • ISO/IEC 17050:2004 Conformity assessment — Supplier’s declaration of conformity
    • ISO/IEC 17050-1:2004 Part 1: General requirements (reviewed and confirmed in 2020) 
    • ISO/IEC 17050-2:2004 Part 2: Supporting documentation (reviewed and confirmed in 2020)
owner