5”s”Japanese method of Housekeeping

The 5S system is a lean manufacturing tool that improves workplace efficiency and eliminates waste. There are five steps in the system, each starting with the letter S:

1. Sort	2. Set In Order	3. Shine	4. Standardize	5. Sustain

By providing a systematic framework for organization and cleanliness, 5S helps facilities avoid lost productivity from delayed work or unplanned downtime.

The Steps of 5S

5S was created in Japan, and the original “S” terms were in Japanese, so English translations for each of the five steps may vary. The basic ideas and the connections between them are easy to understand, though.

Step Name	Japanese term	Explanation
1. Sort	Seiri (tidiness)	Remove unnecessary items from each area
2. Set In Order	Seiton (orderliness)	Organize and identify storage for efficient use
3. Shine	Seiso (cleanliness)	Clean and inspect each area regularly
4. Standardize	Seiketsu (standardization)	Incorporate 5S into standard operating procedures
5. Sustain	Shitsuke (discipline)	Assign responsibility, track progress, and continue the cycle

These steps feed into each other, so the sequence is important.

Clearing out unnecessary materials in step 1 (Sort) will provide the space needed to organize the important items in step 2 (Set In Order).

Then, once the work space is de-cluttered and organized, dirt and grime can be removed in step 3 (Shine).

These changes to workers’ job duties and work environment should be reflected in updated procedures through step 4 (Standardize).

Finally, those new procedures won’t amount to much unless responsibility is assigned and progress is tracked — as required for step 5 (Sustain). And with responsibility and tracking, workers will continue to apply the steps, returning to step 1.

Step 1: Sort

The first step in the 5S process is Sort, or “seiri,” which translates to “tidiness.” The goal of the Sort step is to eliminate clutter and clear up space by removing things that don’t belong in the area.

Clearing the Work Area

For this step, take a close look at the items, tools, and materials in a work area. Items that are necessary or useful for the work being done in that space should be kept there. Everything else should be removed.

Some of those removed items will need to be thrown away or recycled. Other items might belong to another

work process or location; they should be returned to their “homes.” However, you might find some items that you aren’t sure about.

Red-Tagging Unknown Items

If you find an item that you can’t identify, or that has uncertain ownership, it’s time to use a red tag. “Red-Tagging” temporarily attaches a highly-visible tag to the item, which notes where it was found and when. Then, red-tagged items from all work areas are collected in a single location: a “lost and found” for tools, materials, and equipment.

If a work area is missing an important tool, check the red tag collection area to see if it was found somewhere else. Supervisors for each work space should check the red tag collection area periodically, in case something has been missed. Anything that belongs in a work space should be taken back there.

Reassigning Tagged Items

Items may wait in the red tag collection area for a long time. In that case, the original work area (where that item came from) doesn’t seem to need it anymore. It may be useful elsewhere, though.

In one common approach, items may be left in the red tag collection space for thirty days. After that, any supervisor may claim the item for their own work area. If nobody wants it after another week, the item can be removed from the facility entirely. Sell it, recycle it, or throw it away.

If an item will definitely be needed by the company, but isn’t needed right now, it might be best to store it for later. Before putting anything into storage, be sure it will actually be needed again. Have a specific plan for getting that item out of storage again, at a specific time. Don’t store things “just in case” without good cause, and keep track of what’s been stored.

Step 2: Set In Order

The second step, Set In Order, was originally called “seiton,” which translates to “orderliness.” A variety of names have been used in English: “Systematic Organization,” “Straightening Out,” and “Simplify,” for example. No matter what it’s called, the goal of this step is to organize the work area. Each item should be easy to find, use, and return: a place for everything, and everything in its place.

Building a 5S Map

Tools that are used frequently should be stored near the place they are used. Spare equipment, supplies, and other tools that are used less often can be kept in a central location, where multiple teams can share them. Items that are typically used together (such as drills and drill bits) should be stored near each other. Each of these decisions will make sense on its own, but it may become difficult to keep track of everything. It may be helpful to create a 5S map as part of this process.

A 5S map is a diagram or floor plan that provides an overview of a work area, process, or station. It provides a visual reference to show where the tools, supplies, workers, and travel paths are, and how they relate to each other. A good map may also include a description of the work that happens in the area shown.

Depending on your facility’s needs, you may find one approach easier than another:

• Draw up a map, and then implement it
• Physically arrange the workplace first, and then map it out
• Map as you go, testing ideas and writing down what works well

No matter which approach is used to create it, the resulting 5S map should be kept as a training tool, used for reference in later steps of 5S, and updated over time as the work area changes.

Communicating the Plan

Once storage locations are assigned, each storage area should be labeled. Label the outside of cabinet doors to help workers quickly identify what’s inside each one. Then, label any interior shelves to show where different supplies belong. The same ideas extend to rack labels, bins, and other storage systems.

Many facilities use a “shadow board” for tool storage, to ensure that each tool is easy to put back in its correct storage place. With this approach, a label matching the shape and size of the tool is placed where that tool belongs. Workers can immediately spot where each item belongs, and know at a glance if the item is there or not. No more time wasted looking through drawers and bins.

Organization can extend to the floor, too. Work areas, movement lanes, and storage for supplies and finished products can all be marked with floor marking tape.

Step 3: Shine

The third step of 5S is Shine, or “seiso,” which means “cleanliness.” While the first and second steps cleared up space and arranged the area for efficiency, this step attacks the dirt and grime that inevitably builds up underneath the clutter, and works to keep it from coming back.

Routine Cleaning

Shine moves far beyond just pushing a broom around every now and then. It involves regular cleaning of every part of the work area — often a daily wipe-down, and a more thorough cleaning each week.

Importantly, the Shine step is not meant to be a job for the maintenance or janitorial staff. Each worker should clean their own work area, and the equipment they use. This approach has several benefits:

• Workers who are familiar with the area will quickly notice any problems that arise
• Hazards or difficult situations will be understood and accounted for
• Items that are out of place or missing will be recognized
• Workers will tend to keep their own workspaces cleaner during normal operations

Everyone should pay attention to the overall cleanliness of the workplace, being willing to pick up trash and so on. But for 5S to give the best results, each worker should take personal responsibility for their own working space.

Shine as Preventative Maintenance

Keeping work areas clean will have many advantages. One important advantage is that it’s easy to spot leaks, cracks, or misalignments. If the people keeping the area clean are the same people who work there regularly, they will be quick to recognize any of these problems.

Leaving those problems unnoticed and unresolved could result in equipment failure, safety hazards, and loss of productivity. With the constant cleaning and inspections used in the Shine step of 5S, the system can feed into a preventative maintenance program. This way, 5S can extend the working life of equipment and help reduce emergency downtime.

Step 4: Standardize

The first three steps of 5S cover the basics of clearing, organizing, and cleaning a work space; on their own, those steps will provide short-term benefits. The fourth step is Standardize, or “seiketsu,” which simply means standardization. By writing down what is being done, where, and by whom, you can incorporate the new practices into normal work procedure. This paves the way for long-term change.

The Power of Writing Things Down

It’s been said that “If it isn’t written down, it didn’t happen.” Writing down the decisions that you make in your 5S program will help ensure that your work doesn’t just disappear. If you made a 5S map in the Set In Order step, that map can be part of your new standard for the area. In the same way, the process that you use for red-tagging items can be written down and included in the standards.

Writing out your decisions doesn’t mean you can’t change your mind, though. The purpose of 5S is to make your workplace better, not to make it unchangeable. You are writing the standards for your facility, and you can change them to fit new information or new business needs.

Tools for Standardizing

Once you’ve made decisions on how to change your work practices, those decisions need to be communicated to workers. This communication is a key part of the Standardize step. Common tools for this process include:

• 5S checklists – Listing the individual steps of a process makes it easy for workers to follow that process completely. It also provides a simple auditing tool to check progress later on.
• Job cycle charts – Identify each task to be performed in a work area, and decide on a schedule or frequency for each of those tasks. Then, assign responsibility to a particular worker (or job duty). The resulting chart can be posted visibly to resolve questions and promote accountability.
• Procedure labels and signs – Provide operating instructions, cleaning steps, and preventative maintenance procedures right where that information will be needed.

Step 5: Sustain

The fifth step of a 5S program is Sustain, or “shitsuke,” which literally means “discipline.” The idea here is continuing commitment. It’s important to follow through on the decisions that you’ve made — and continually return to the earlier steps of 5S, in an ongoing cycle.

Never “Once and Done”

The 5S approach was never meant to be a one-time event, but an ongoing cycle. This is key, because early successes in 5S can open the way for problems. If open space becomes available in the Sort step, but afterward, tools and materials are allowed to gradually fill in that space without any organization, the end result can be an even bigger mess. The solution is to apply the ideas of 5S over and over, as a routine part of normal work. That’s why Sustain is so important.

Sustaining a 5S program can mean different things in different workplaces, but there are some elements that are common in successful programs.

	Management support – Without visible commitment from managers, the 5S processes won’t stick around. Supervisors and managers should be involved in auditing the 5S work processes, and getting feedback from workers. They also need to provide the tools, training, and time for workers to get their jobs done right.
	Department tours – Bringing teams from one department to visit other departments will help familiarize the entire workforce with the processes of your facility. This type of “cross pollination” helps to spread good ideas, and inspires people to come up with new ways to improve the 5S implementation.
	Updated training – As time passes, there may be changes in your workplace, such as new equipment, new products, or new work rules. When this happens, revise your 5S work standards to accommodate those changes, and provide training on the new standards.
	Progress audits – The standards that are created in the 5S program should provide specific and measurable goals. Checking on those goals with a periodic audit can provide important information and guidance. Where is 5S working well? Where are teams falling behind?
	Performance evaluations – Once you know your goals are reasonable, make performance part of each employee evaluation. When teams and individuals perform well, celebrate it, and post overall results so each team can see how they compare to the rest of the facility.

Sustain Is Not the End of 5S

While it’s the last step in the sequence, Sustain is not the end of 5S as a whole. One pass through the steps can expose problems that were hidden beforehand. Following the steps again can resolve those problems, and help discover new ways to improve. Continue through the cycle again and again to keep your facility at the top of its potential.

A Sixth “S” for Safety

When it comes to lean manufacturing and workplace improvement, 5S is one of the most widely known and used lean tools. It’s no surprise: 5S can increase workplace efficiency, reduce costs, and improve quality. But with many lean programs, it’s easy to focus only on those goals, and lose sight of the human factor. Worker safety is critical. That’s why many facilities add another step to the 5S cycle, calling the result “6S” — with Safety.

Unlike the first five steps, Safety is not a sequential step. It must be considered during each of the other steps. During the Sort phase, for example, you might decide that a given tool is obsolete because a newer version is safer to use. Likewise, during the Standardize step, work procedures need to be standardized to improve workplace safety, not just efficiency.

Keeping workers safe isn’t just the right thing to do: there is a hefty monetary cost for accidental workplace injuries. A study by Stanford University found that the costs for a bone fracture can cost a company $50,000 up front, as well as another $55,000 in indirect costs. Each incident can lead to an OSHA inspection and citations, as well as an increase in insurance costs.

Choosing to implement 6S, instead of the standard 5S program, can help you improve workplace organization and efficiency, while also making the workplace safer.

Benefits of a 5S Program

Because 5S focuses on improving a workplace, and different workplaces may have little in common, it can be hard to predict the exact results of using the program. However, some benefits are almost always found:

	Better time usage – Getting rid of unwanted materials and organizing the important tools and supplies will eliminate clutter and confusion. Workers spend less time finding and retrieving what they need, and can be more productive instead.
	Less wasted space – Eliminating unnecessary material stockpiles and consolidating tool storage will clear up room for more useful applications. Every square foot of floor space has a cost, and getting the most out of that investment will maximize your facility’s profitability.
	Reduced injury rates – Organizing work areas for efficiency and ease of use will reduce the movements needed for workers to do their jobs. Removing clutter and routinely cleaning up spills will eliminate trip hazards. As a result, workers will experience less fatigue and fewer injuries.
	Reduced equipment downtime – When tools and equipment are kept clean, routinely inspected, and used in a standardized way, preventative maintenance is much easier, and major failures can often be prevented entirely.
	Improved consistency and quality – Standardizing work processes will reduce variations and mistakes. By eliminating faults and failures, overall productivity can be dramatically improved.
	Heightened employee morale – When 5S principles are used effectively, workers see that their input is valued, and their performance is recognized. This creates an environment where workers can feel pride in their work, and take an interest in improving their company.

These benefits are not just good feelings. By documenting their situations before and after adopting 5S, many facilities have been able to show actual, measured improvements.

For example, the University of Georgia started a lean program in 2009. Using 5S, they reduced the travel distance for processing supplies by 83%, saving $7,000 to $10,000 in labor each year. usfin.uga.edu/)

Similarly, a hospital used 5S principles to reduce setup time in operating rooms by 37%, and reduced the number of tools needed for some procedures by 70%. On the financial side, the hospital realized savings of about $2.8 million per year. (Source: Journal for Healthcare Quality. September/October 2015. Volume 37, Issue 5)

5S in Lean Manufacturing

Lean Manufacturing is a way of thinking about productive systems with a focus on reducing the unnecessary — that is, eliminating wasted materials, effort, and time. This approach helps to improve overall productivity, quality, and profits. 5S fits naturally here, because it works toward a streamlined, organized, and clean workplace.

Some of the other tools under the Lean Manufacturing umbrella work particularly well in cooperation with 5S. For example:

• Kaizen – Make many small changes in the pursuit of continual improvement. The cumulative results can be major improvements in quality, safety, and profit. The ongoing cycle of improvement matches perfectly with the Sustain step of 5S.
• Kanban – Use a demand-driven production chain to refocus on customer needs and reduce unnecessary supply stocks, inventory, and work-in-progress. Streamlining work processes in this way is essentially applying the Sort step of 5S to the entire business, instead of just a work area.
• Total Productive Maintenance – Use preventive maintenance and autonomous maintenance to improve productive use of all equipment. Reducing downtime and eliminating errors will result in better productivity and profitability. The Shine step of 5S can play a key part.
• #Iso Certification in India
• Certification in Delhi
• Certification in Maharashtra
• Certification in Mumbai

Next Steps with 5S

To see how to implement a 5S program in your facility, see our in-depth article on getting started with 5S. You can also request our free Best Practice Guide to the 5S System for a step-by-step approach, or as a helpful training tool.

During the process of implementing 5S, you’ll find that visual signals can be an important part of the system:

• Floor marking and large signs show where red-tagged items need to be collected
• Shadow boards and labeling systems demonstrate the new storage system for tools
• Instruction labels list the steps of a new work process for easy reference

When you need to create customized visual signals for your facility, rely on the DuraLabel line of industrial label and sign printers, and the PathFinder line of floor marking and safety tapes. These products are engineered to make long-lasting custom signage and markings for a variety of industrial needs, and they’re perfectly matched for a 5S implementation.

Related Resources